DIY

DIY Wide-Plank Floors (Made from Plywood!)

I really wanted old-looking white floors for our new studio space. I actually saw some interesting, beat-up knotty oak at Lumber Liquidators for a little more than a dollar per square foot, which is practically highway robbery when it comes to wood flooring prices. But it was only about 2″ wide and after laying all…

I really wanted old-looking white floors for our new studio space. I actually saw some interesting, beat-up knotty oak at Lumber Liquidators for a little more than a dollar per square foot, which is practically highway robbery when it comes to wood flooring prices. But it was only about 2″ wide and after laying all that tongue-and-groove flooring on the other side of our house this year, I decided to think outside the box and figure out a way to get wide-plank wood flooring to go in the studio for way, way less.

 photo DIYwideplankfloors.jpg
Then I did the thing that I sometimes do, where I’m convinced I just invented some incredible new DIY and then I google the idea and there are already a dozen tutorials up on the interwebs for my idea that felt so original and unique only five seconds before! (Sadness ensues). Seriously though, are there any new ideas in the universe? Maybe one day I will finally come up with something revolutionary, but for today, here’s my version of plywood wide-plank floors.

So there’s this really cool event space in Manhattan called Gary’s Loft that companies love to host parties at. One of the spaces is big and open and all white, with gorgeous, gappy wide-plank white wood floors. I loved going to parties at Gary’s.

 photo IMG_1847.jpg

When I was planning my approach to the DIY, I had those gorgeous floors in mind. They were perfectly imperfect and all worn and full of character. I had the thought that cutting down and using plywood as the planks could achieve a similar, and even more rustic (in a good way) look. So I headed to the lumber section at my local Home Depot and found just the right plywood. It’s almost a half-inch thick and one side is more finished than the other.

 photo IMG_1730.jpg

Plywood sheets are 4×8′, which is 32 square feet. We needed to install about 800 square feet of flooring up in the studio space with the attached bedroom and balcony. Which meant we needed about 25 sheets of plywood. At less than $18 per sheet, my price per square foot came in at about 50 cents, which is complete insanity!

 photo IMG_1731.jpg

So, I found the plywood I wanted, took a photo of the price tag, and walked up to the customer service desk. I placed an order for 25 sheets and I asked for each sheet to be cut down into 8″ planks, lengthwise (which meant there was no waste – exactly six planks from each sheet). I’ll admit that I did get a few funny looks, but for the most part everyone at Home Depot was incredibly nice and accomodating, given the huge ask. I was more than prepared to pay 10 or even 25 cents per cut, like one of the guys in the lumber department suggested they might charge me at the order desk. I think I paid for cuts when I did the wall planking project in our mudroom, but this time there was no charge for all those cuts! I’m pretty sure it was because I was really flexible on timing and let them take as long as they wanted to get the order finished. And even then, it was less than 24 hours before they called to tell me my planks were ready to be picked up.

 photo IMG_1772.jpg

We borrowed a truck from my kind brother in law and he and the Home Depot guys helped us load up the 25 sheets of cut wood. The tricky part was then getting all the wood upstairs! These amazing gloves practically never left my hands during the two or so days I was installing the planks and moving them around. The gloves are thin, but really durable and they grip so well that you almost forget you’re wearing gloves at all. They’re my favorite brand I’ve used so far.

 photo IMG_8962.jpg
orbital sander  //  sanding discs (similar)

Once we had all the carpet removed and all the wood planks upstairs to the back porch, it was time to start the only tedious part of this project: all the sanding. It was actually pretty easy work, but it just took some time (actually about a minute and a half or two per plank, which really adds up). I asked Heather to sand while I was installing the planks, and usually the timing worked out well and we were able to keep a good pace.

 photo IMG_9005.jpg

This new orbital sander has changed my LIFE. You guys, what have I been doing with my dorky little Mouse sander for all these years?! Orbital is where it’s at. Worth every last penny.

 photo IMG_8990.jpg

I bought a couple packages of the bulk 60-count course/removal sanding pads and they really worked fast on any rough parts or spray painted markings or splinters on the plywood planks. It worked out best to change the sanding pad every three or four planks. And I didn’t worry about getting every imperfection off – you’re just going for the obvious parts that look bad or like they could hurt a bare foot. We also sanded down the perimeter of every plank so that the edges were sort of beveled. I think this step made a huge difference in helping the planks look like they’re not just cut down plywood pieces.

 photo IMG_1859.jpg

The installing part was so easy, especially when there weren’t additional cuts needed. You’ll want to start on the longest, straightest wall you have. Don’t start on a wall that requires a lot of cuts and notching out – your lines will get messy and crooked really fast. If you start your installation on a long, straight wall and just focus on maintaining even spacing, the planks will look great. You can use a ruler or t-square to help with spacing, but I felt comfortable eyeing it.

 photo IMG_8936.jpg
 photo IMG_8948.jpg

To lay the wood down, I first squiggled on to the back side of the planks a line of Subfloor Liquid Nails (in the big contractor size, using the oversized caulking gun). I went through at least a dozen of these tubes of glue – you’ll need a lot of it!

 photo IMG_9008.jpg
Then you place the plank down and step on it to help spread the glue before nailing it in place. I have this angled finish nailer (which is also great for installing moulding) and I really, really love it. I have a battery-operated brad gun too and there is just no comparison to the pneumatic nailers. It’s so worth buying an air compressor, or even just renting one and a nailer for the day from Home Depot or Lowes.

 

 photo IMG_8944.jpg
I nailed a brad in every 8-10 inches along both sides of every plank. I didn’t fill the nail holes either in the end to help the wood look more like old planks.

 

 photo IMG_1791.jpg
You’ll want a couple of different saws on hand to help with the cutting. I found a miter saw was the easiest and most exact way to cut down the planks shorter. My saw isn’t big enough to cut through a whole plank clean, so I had to cut and then flip the board and cut again. My saw has a laser though, so it was easy to line things up and get an exactly flush cut the second time. It goes faster than you’d guess.
 photo IMG_1866.jpg
I love an excuse to use my Dremel Saw-Max and it worked SO well with this project. Any time I needed to notch out part of a plank, I could just zip around with this little guy.
 photo IMG_8966.jpg
 photo IMG_8989.jpg
dremel saw (similar)
If you don’t have a Dremel, a regular old circular saw and a coping saw will work really well. I ended up using all of these saws at different points. The closets and our spiral stairs made for some tricky angles.
 photo IMG_1777.jpg
The floor went down really fast though, especially when we got past all the cuts and on to the straight laying. Just like with other flooring, you’ll want to stagger the seams and throw in some shortened planks for every two or three full-length planks, just for variation.
 photo IMG_1861.jpg
You’ll find that not all the planks will be exactly 8″ wide, which isn’t a big deal if you are going for a sort of gappy look like I was. I shot for a gap of between 1/32″ and 1/8″, though there are some full 1/4″ gaps in some places. I ended up really loving the variation there. It gives the floor a lot of character.
 photo IMG_9065.jpg
When the wood was all installed, I wanted to get everything painted and sealed asap, so the raw, freshly sanded plywood wouldn’t get dingy. I painted a few sample planks and I decided I wanted to be able to see a lot of the graining and knots in the planks, so I went for a more white-washed look over an opaque, painted look. I mixed one part water-based primer with two parts water in a big bucket – and it was pretty watery, but I knew it would look right in the end. I used primer because I wanted a chalky, limed look underneath the sealer.
 photo IMG_9080.jpg
Heather and Ali and I rolled on the first coat together in about 15 minutes. Painting floors goes so fast for some reason! You can be really sloppy with this first coat, too, so that the paint drips down the sides of the planks.
 photo IMG_1878.jpg
The second coat smoothed out the color a lot. I tried to paint plank by plank to minimize roller marks (the roller was about the same width as the wood).
 photo IMG_1884.jpg
The extension poles make it a super fast and easy job.
 photo IMG_9095.jpg
This was just after rolling on the second coat of the primer mixture. It looked pretty pink to me, but I think a lot of that was the khaki wall color reflecting down.
 photo IMG_1894.jpg
The poly I used to seal the planks ended up changing the color a little too, even though it said it was a clear formula. It has some brown to it, which I ended up actually really loving. It made the floors a really pretty, creamy ivory color with gray undertones.
 photo IMG_9126.jpg
 photo IMG_9130.jpg
Once the walls were painted bright white, the more muted floor color was exactly perfect. I don’t think a pure white would have been right for the floors in here. I love the tone-on-tone look so much more.
 photo IMG_2676.jpg
The semi-gloss sheen of the poly is really pretty and it’s holding up really well so far. There are a few places I missed and need to touch up, but that’s an easy fix.
 photo IMG_0950.jpg

 

 photo IMG_1096.jpg

 

 photo IMG_1081.jpg

We haven’t even started decorating in here yet, but I LOVE how bright the space feels now! Remember how dark it was just a few short weeks ago?

 photo xDSC_0655.jpg
 photo xDSC_0652.jpg
 photo xDSC_0650.jpg
 photo xDSC_0645.jpg

The floors have completely changed the way I feel about this space! Instant character!

 photo IMG_1077.jpg

And at only 50 cents a square foot for the plywood, it’s hard to find things to complain about. It’s a great look, especially for the price.

 photo IMG_1066.jpg

The studio is becoming a really lovely place to get work done and I know it will be perfect for photographing projects for the blog and book. We get great light in here all hours of the day and all the shades of white make the room just glow. :)

 photo IMG_1056.jpg
 photo cIMG_0998copy.jpg
 photo IMG_0979.jpg

Now, on to the decorating!

Join the Conversation

229 thoughts on “DIY Wide-Plank Floors (Made from Plywood!)

    1. They are great! If I were to do it again, I would pay a little more for a higher quality plywood, but I still love them! If you look on my instagram stories highlights, you’ll see some video of the floors after a few years of wear and tear. Hope that helps!

      1. what is your instagram so I can check out the floors after a few years?

  1. What’s up,I log on to your blog named “DIY Wide-Plank Floors (Made from Plywood!) – Little Green Notebook” like every week.Your humoristic style is witty, keep doing what you’re doing! And you can look our website about proxy list daily.

    1. What a great idea, never thought of this and it is functional at a super low cost. As far as cleaning it regularly, I think sweeping in the direction of the grooves would get most dirt, sand, etc., along with a strong shop vac maybe once every month or two to suck out anything the broom can’t dislodge.

  2. Thank you so much for this WONDERFUL idea! I just finished this in our basement where I am building an office/studio. I upgraded to a more expensive finish on the plywood (out of laziness, truly) and finished it with a clear poly. It looks so lovely! And it was SO easy to do! Took only a couple days including the poly coating. Thank you, again!

  3. Back in 2010 I thought I had been the only one to use this plywood, which we painted high gloss white – there’s nothing new under the sun. lol! We put the same in our next small cottage. It’s 2018 & we’re in a much larger home & going to do your whitewash technique for a fresher look. (Doing a happy dance)

  4. This is an awesome idea! Fantastic job!!! We just took over the family farm and did a house swap with my in-laws at the same time, ugh. 20 years of water damage & neglect. The floors are awful and we haven’t much money, after opening many cans of worms, we are still living in our vintage camper next to the barn. I’ve been bummed til now… This technique will allow us to buy bit by bit and maybe by fall, we’ll have enough to do the whole house over next winter. I am very excited, thank you so much for sharing!

  5. Ite a great idea and post but superfluously crappy that you don’t answer the one question everyone wants an answer to.

    1. Hi Jane!

      This post is quite a few years old at this point, so I don’t see all the comments coming through. I’m happy to answers any of your questions though if you want to respond here or send me an email!

      Thanks and sorry for the delay,

      Jenny

  6. love the idea and look forward to start the project in a large room that we use as a family room, huge question! The existing floor is an old vinyl floor, but in good condition, do I need to remove the vinyl? Obviously, it would be so much easier not to have to go through the agony of removing the vinyl and all the crap and glue that would be a major project in itself!

    Thank you,

    Randy

    1. Hi Randy, Do you have vinyl on plywood subfloors? These plywood planks cannot be installed on slab without using a lot of glue and a moisture barrier paper.

  7. After reading your post and all the equipment you purchased it would of been less expensive and easier to buy it already made with less work and time. Looks okay though.

    1. I had a lot of these tools already! Totally can see why someone would not want to do this DIY, but it’s a great option for others.

  8. Hi there!

    Awesome flooring tutorial! I followed your tutorial and did the same two years ago! Thank you.

    Our floor has since picked up lots of dings, scratches and marks and we’d like to give it a freshen up and whiten it up again.

    We used poly as a sealer (like you), however we’d like to make it whiter and cleaner, and putting another coat of poly on top will just cover up the marks we have now.

    Do you know if it’s possible to apply something like a different white varnish straight over the poly?

    I do not want to remove the old poly as it’s far too much work!

    How have you maintained the floor?

    Many thanks in advance!

    1. They’ve held up fine! We touch up the floor paint as needed. We did an addition to this area and I like the floors so much I’ll be laying more rather than replacing! While I have the nail gun out, I’ll probably put a few more nails in a couple of boards that are slightly raised, but I’m still happy with these.

  9. I’m not sure if I’m making a mistake. I have BEAUTIFUL hard wood floors, they just need sanded. I think I want to put plywood floors down. Is this a good idea? Or should I just have my good floors sanded?

    1. Hi. I know someone who had real wood flooring thru out. He told me they could be sanded and refinished three times before they would probably need replacing. Just saying.

    2. I absolutely would have your floors refinished instead of this method. This is meant to be a cost effective alternative for new flooring. Refinishing wood floors is only a few dollars per sq ft!

  10. Do you think the same process that you did for the flooring could be as a backsplash in the kitchen?

  11. I think plywood is made of very thin layers of wood, so I am not sure of the durability of the floor. Also I think that the separation between the planks will allow a lot of dust to get inside.

    1. Hi Charlie, No problems with the thin layers of wood – that’s how all engineered wood is made. But you’re right about the wide seams we used. I like the look, but it does collect dust!

  12. Absolutely love the fresh light look. Your directions and explanations are concise and interesting. Thanks for sharing! I can’t wait to try this.

  13. Seriously wish I had found this before I spent $1000 (all totaled) for cheap laminate, 3/8″ plywood underlayment (to raise the finished floor to the same height as my wood floor in kitchen/dining area) and good quality sound proofing/vapor barrier for one 15×17 room! Then, to add insult to injury, somewhere in the fine print on the enclosed paperwork, it stated do NOT mop the floors! Supposed to be high traffic laminate but you can mop??? I will be putting this down in the rest of the rooms, for sure.

  14. Thank you for taking the time to explain everything. There are not many people ( especially carpenters) who will tell their trick, because they want to keep us dependent on their expertise.

  15. Please take a couple of hours and answer people’s questions!! My goodness! You replied to one and asked her to send you an
    e-mail with her questions.

    1. Hi Tracy. This post is very old and I don’t always see the comments come through. I have thousands of blog posts on this site – so you can imagine how tricky it would be to keep an eye on the comments for every single post. I do my best to respond. If anyone needs immediate feedback, they are welcome to email or DM me on instagram and I always get back to people there. Thanks, Jenny

      1. I think you should ignore the cranky people. The floors are lovely and you have answered so many questions, sometimes multiple times! Going to do this is a little beach cottage and I appreciate you sharing your experience.

  16. Love your results! Was there any question as to whether a sub flooring was needed, like the thick black fabric sub flooring?

  17. totally awesome. and the detailed instructions are so awesome. If I do this project which is the best idea I have looked at in months I will respond again. thank you so much. I am an artist looking for a larger studio and retail space. I found something I really like would need to do something about the nasty cream color plush carpet, not me at all. I will be in touch.

  18. Nice job.
    I installed 2 similar floors.
    Being in the building materials industry I have access to a lot of Scrap lumber.
    One floor is oak strip flooring made from planned oak moulding.
    The second is 6 inch wide 3/8 thick radiata dunnage boards.
    I went for a more formal look.
    tight joints minimal nails.
    I troweled down a marine grade adhesive and installed like tile.
    Available at Lowe’s for $15 per tub.Way less than tubes of adhesive and 100 per cent coverage and better hold down
    I can send pictures if requested.
    Larry

    1. Hi Larry,

      Can I see your pictures of your floor? We are looking at our options for inexpensive flooring and would be interested in seeing what you’ve done. Thanks!

  19. I love these floors! So adaptable… I’ve installed them in 3 houses so far and love the look. I only made a single modification, I screwed them to the subfloor instead of glued, but they have a wonderful farmhouse style. Thank you for saving me sooooooooo much money!!

  20. I love the floor.
    I do want to know if the gap between planks traps a lot of debris. What things could I do to prevent this?

    1. Hi Sabrina! You could make the floor board joints as wide or as tight as you’d like! If you sand the edges like I did, you can butt the boards right up to eachother and still get some definition! Hope that helps!

  21. Just wanted to leave a comment letting you know your post inspired me to do my version of plywood floors. It was a great idea and I’m grateful that you shared. :)

  22. Your new floor is perfect. Absolutely perfect.

    I too believe I thought of this first – bc I am always looking for thrifty ways to achieve everything . . .
    But I actually think I DID think of it first – well over 15, maybe 20 years ago when – discussing it with one or two construction people – they said it was crazy & would look like ****.

    Meanwhile, being non-tech savy – the internet was growing by leaps & bounds. By the time I started googling every cool idea I’ve ever had, not only had they all been done, they have all been creatively improved upon to varying degrees.
    Oh well. There truly is nothing new under the sun.

    Thanx for your many beautiful images. So inspiring. I can’t wait to do my 16x9ft washroom.
    I THINK I might do 5 inch & 8 inch planks, for that really old farmhouse look! I thought of painting them an opaque seafoam green, but I think you’ve convinced me I can thin the colour & do a stained look . . .

    In another room, I just want to polyeurethane the planks and let the wood darken, yellow, & whatever naturally under the poly.

    Thanx again, for proving anything is possible!

  23. What a great job you did!!
    You definitely encouraged me to try it myself. I too like wide planked floors.
    Thank you for your tutorial!

  24. This is absolutely lovely! I’m researching ideas for my tiny house, and I shall definitely be using this as my flooring – plywood planks! Amazing.

This error message is only visible to WordPress admins
There has been a problem with your Instagram Feed.
© Jenny Komenda. All Rights Reserved.
Site by