DIY

DIY Leather-Wrapped Console Table (and a Milk Paint Mirror!)

Remember this citron yellow console table? I accidentally sawed a big line in it with my circular saw when we were doing the plywood floors in the studio (whoops!). Rather than toss the table, I felt like it could be salvaged with a little thinking outside the box. There is a place in Phoenix called…

Remember this citron yellow console table? I accidentally sawed a big line in it with my circular saw when we were doing the plywood floors in the studio (whoops!). Rather than toss the table, I felt like it could be salvaged with a little thinking outside the box.

 photo Jenny_DIYimages-35.jpg

There is a place in Phoenix called the Fabric Depot (it’s in Cave Creek) and they have what looks like the best price and selection of leather hides in the Valley. Half hides are usually about $60, which is just about as cheap as my leather place in Brooklyn! Yay!

 photo IMG_3086.jpg


I picked up this black half hide there and when I got it home I saw this little brand or something with JM initials. Meant to be ours. ;)

 photo IMG_3088.jpg

The first step is to make a pattern of all the sides of your console table by flipping the hide over and tracing each piece out. (PS the old IKEA Malm console table would work really well for this project or the current Lack sofa tables seem like they could work well also.) Oh, and I spray painted the table black first in case there were any little gaps between the leather pieces in the end, hopefully they would be less noticeable.

 photo IMG_1885.jpg
 photo IMG_1899.jpg
I cut out the pieces and then used Fabritac to secure each of the pieces to the table.
 photo IMG_1905.jpg
It helps to use a glue brush to make sure there’s an even layer of glue and no too-thick parts that will show under the leather.

 

 photo IMG_1915.jpg
It’s most important to get glue right at the edge of the leather, so the edges lay flat.

 

 photo IMG_1916.jpg
I used these small brass escutcheon brads as nail head trim. I wanted the brads to be more subtle than traditional nail heads and these worked great.

 

 photo cIMG_3090.jpg
We marked out the first row, but it was pretty easy to eyeball the right spacing (about an inch) after I got in a rhythm.

 

 photo cIMG_3093.jpg

After all the nails were in, I could see that some of the leather had pulled a little bit and the edges needed to be trimmed with an X-Acto knife, which was pretty easy to do. (see the JM here?)
 photo IMG_3118.jpg
I LOVE how this one turned out. We were able to salvage a table that wouldn’t have been otherwise usable with a big old saw mark right in the middle of it. The texture is so pretty and the little sparkle from the nails is just enough.

 

 photo Jenny_DIYimages-29.jpg
 photo bIMG_3133.jpg
 photo Jenny_DIYimages-39.jpg
It’s not perfectly perfect, but I think that makes it look unique and handmade.
 photo IMG_3122.jpg
I love how it looks with the DIY upholstered bench project.

 

 photo Jenny_DIYimages-36.jpg
 photo Jenny_DIYimages-341.jpg
Oh, and some of you recognized the old mirror we had hanging in the brownstone over the fireplace. I never loved the old finish and I’ve been itching to try milk paint for years and this seemed like the perfect application.

 

 photo IMG_1849.jpg
We picked up a bag of milk paint at a local antique store (Merchant Square) and added water to make the paint. I chose a creamy white color called Linen.

 

 photo IMG_1863.jpg
 photo IMG_1865.jpg
The paint is (not surprisingly) super watery, but it covers really well. The old finish on the mirror made the paint flake up a little, but I actually loved the effect. I didn’t want the mirror to look newly painted anyway.

 

 photo IMG_3124.jpg
 photo Jenny_DIYimages-38.jpg
Sometimes I think it’s easy to get nervous about painting something, but this mirror was not precious to me and I didn’t love it as it was in the wood stain. There wasn’t much to lose, and I feel like the risk totally paid off here. I love it now.

 

 photo Jenny_DIYimages-30.jpg
How was your weekend? We had a family reunion and it felt really great to switch gears for a couple of days! Also, it was amazing to catch up on a little sleep. :)PS Pretty photos above were taken by Michelle Herrick
Join the Conversation

23 thoughts on “DIY Leather-Wrapped Console Table (and a Milk Paint Mirror!)

  1. Oooh this has given me such a great idea for our old coffee table that's been relegated to the garage store! Thanks for the inspiration!

  2. The console table looks amazing! I've been thinking about making a Parson's style table with a faux marachite finish. But reading this post makes me want to try one with leather. The milk paint mirror looks lovely above the table.

  3. I love the mirror now!! I have never tried milk paint, but now you've got me considering it. Also, that butterfly shadow box art is really pretty. Did you buy it that way?

  4. the creativity never ends! What a smart idea. Love the table and love the mirror painted. It's so true that it can be daunting to paint but it definitely pays off.

  5. WOW these shots- I'm literally drooling. Can't wait to see more in the full reveal! Can you give us some info on the artwork behind the butterflies? Looks like tissue paper? Thanks!

  6. all of your DIYs are stunning!
    how long did it take to paint the mirror and how many coats? i have one very similar that i want to paint now. thx!!

  7. Looks fantastic! I am dying to see your house from top to bottom! Thanks for using milk paint. I have a few projects that I have been wanting to try milk paint on. Did you find that it adhered well? I found a recipe to make your own; I think that I am convinced to give it a try ;) Like you, I have a piece that I won't be heart broken if it doesn't turn out.

  8. I love this project… I have a round table that needs some help on top, but isn't exactly expensive enough to merit a refinishing. How do you think this technique might work for a round vs rectangle?

  9. I think this is now replacing the bench as my favourite DIY project of your's (or probably anyone's)! I've dreamt of this ,but didn't think a normal person could do it. I definitely need to investigate my local fabric stores for leather remnants and hides.

    I guess I'm the only one who preferred the mirror natural, especially with a tropical wood. Oh well, it looks beautiful in any case.

  10. Hi Jenny,
    Don't know how many readers of yours that live in Phoenix and Im sure they could look it up on Google but the Fabric depot is not in Cave Creek its on Cave Creek Road in Phoenix. Not sure if that was a typo on your post.
    To bad I missed ya, I don't live to far from there. Could have met you for a cool lemonade :).

© Jenny Komenda. All Rights Reserved.
Site by